Pleated Filter

Design Code : ASME Sec. VIII Div.1 / ASME Sec. VIII Div.2 / MFG Standard

In the Oil & Gas Industry, an efficient filtration/separation system is critical to the reliability and performance of the physical assets that produce, transport, and process oil and gas, as well as, their dirivative and finished products. Optimizing the reliability of these filtration systems is essential in maxmizing your operation performance.

MNM’s has worked diligently to advance the economics of Oil & Gas Filtration, creating a knowledge based company with an industry leading staff of experts capable oil delivering a variety of filtration/separation solutions to fit your specific maintenance and operating needs. Utilizing this experience, MNM’s has succeded in developing thousands of different filter elements covering a wide varity of filitration applications.

Applications

• Gerneral Water• Solvents
• Amine Filtration • RO Pre-Filtration
• Glycol Filteation • Injection Water
• Process Water• Waste Water
• Catalyst Recovery• Lube Oil
• High Purity Chemicals• Final Products Filtration

Pleated polypropylene process cartridges are 100% polypropylene with a wide selection of gasket and O-ring materials available.

Polypropylene end caps are thermally bonded to the media packs eliminating any need for adhesives which might react with or contaminate critical

process fluids.

A broad range of efficiencies with beta ratios of 50 to 5000 provides the flexibility to address any application or upset condition.

• Temperature Limit: 180°F

• Efficiencies: 0.5, 1, 3, 5, 10, 20, 30, 40, 70 microns

• Beta Ratios: 50, 100, 200, 1000, 5000

All components meet USP specifications for Class VI 121°C criteria and are FDA compliant Ratings above 30 microns do not require support layers.

Pleated polyester process cartridges are 100% polyester with a wide selection of gasket and O-ring materials available.

Polyester end caps are thermally bonded to the media packs eliminating any need for adhesives which might react with or contaminate critical process fluids.

A broad range of efficiencies with beta ratios of 50 to 5000 provides the flexibility to address any application or upset condition.

• Temperature Limit 240°F

• Efficiencies: 0.5, 1, 3, 5, 10, 20, 30, 40, 70 microns

• Beta Ratios: 50, 100, 200, 1000, 5000

Ratings above 30 microns do not require support layers.

Pleated microglass process cartridges are 100% glass fibers with a phenolic binder that provides excellent strength in many liquid applications.

Support layers are standard polyester or are available in polypropylene or cellulose to suit temperature or compatibility requirements with a wide selection of

available elastomers.

Polypropylene or Polyester end caps and cores are thermally bonded to the media pack.

Alternatively, end caps are plated or stainless steel bonded to the media packs using either plastisol or two part epoxy to secure the media pack.

• Temperature Limit 275°F

• Efficiencies: 0.5, 1, 2, 5, 10, 20, 30, 40 microns

• Beta Ratios: 50, 200, 1000, 5000


Copyright ⓒ All Right Reserved by FS Engineering Company