C-TYPE STRAINER
It is a makeshift strainer.
Even if a new factory has cleaned well, it is difficult to determine when and where foreign matter comes out.
For that case, additionally install this butterfly net shape cone type strainer.
It does not have a body and is put it between flanges to set up.
Inspect and remove it 6 to 12 month after installation.


C-Type Strainer
[NPS] A (mm) | [NPS] B (inch) | ØD (JIS 10K) | ØD (JIS 20K) | ØD (ASME 150#) | ØD (ASME 300#) | Ød1 | Ød2 | L |
---|---|---|---|---|---|---|---|---|
40 | 1-1/2” | 86 | 86 | 83.5 | 92 | 36 | - | 50 |
50 | 2” | 102 | 102 | 101 | 108 | 46 | 25 | 60 |
65 | 2-1/2” | 121 | 121 | 120 | 127 | 58 | 30 | 70 |
80 | 3” | 131 | 137 | 133 | 146 | 70 | 40 | 80 |
100 | 4” | 156 | 162 | 171 | 178 | 92 | 55 | 100 |
125 | 5” | 187 | 200 | 194 | 213 | 115 | 70 | 120 |
150 | 6” | 217 | 235 | 219 | 248 | 135 | 90 | 140 |
200 | 8” | 267 | 280 | 276 | 305 | 185 | 100 | 190 |
250 | 10” | 330 | 353 | 337 | 358 | 230 | 120 | 230 |
300 | 12” | 375 | 403 | 407 | 419 | 270 | 140 | 270 |
350 | 14” | 420 | 447 | 447 | 482 | 305 | 160 | 310 |
400 | 16” | 483 | 507 | 510 | 536 | 350 | 180 | 350 |
450 | 18” | 538 | 572 | 546 | 593 | 400 | 200 | 410 |
500 | 20” | 593 | 627 | 603 | 651 | 450 | 220 | 460 |
550 | 22” | 645 | 682 | 657 | 700 | 500 | 25 | 510 |
600 | 24” | 695 | 730 | 714 | 770 | 550 | 270 | 560 |
650 | 26” | 745 | 800 | 772 | 830 | 600 | 300 | 610 |
700 | 28” | 807 | 850 | 828 | 894 | 650 | 330 | 710 |